valance wanted



Looking for something? Post it here!
Post Reply
User avatar
roliboni
Posts: 7
Joined: Wed Apr 11, 2007 2:24 am
Location: Luxembourg

valance wanted

Post by roliboni »

Hello to all.

I am Roland, from Luxembourg, and i'm new here. I drive a 59 Plymouth Belvedere 4 door sedan. I bought before 15 years and completely restored the car immediately.
However is missing the front valance with the part on top.

Does someone have an idea, where I can get these parts?

thanks

Roland
Plymi01.jpg
my car
Mopar or no car ;O)
Top
User avatar
Faulkner
Posts: 5132
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:
Contact Faulkner

Post by Faulkner »

Welcome to the Forum, Roland. I noticed that you tried to upload an "avatar" for your posts, but my service provider does not allow me to keep the directory open where those images go. So I took the liberty of making one for you, opening the directory, putting it in, and closing it again. If you want a different one, let me know. And send me more pix please!

Valences are hard to come by, as is the shelf above. You might be able to get a used one in decent shape. John Fowlie, any help for our friend in Luxemburg?

And if anyone else needs an avatar, let me know!

Dan
"If it's new, Plymouth's got it!"
Top
User avatar
big m
Posts: 975
Joined: Wed May 25, 2005 6:14 pm
Location: Northern California
Contact:
Contact big m

Post by big m »

I currently do not have any front valances that are remotely repairable. I've got a few more '59's spotted, but haven't gotten my mudhooks on them yet. ---John
In rust we trust!
Top
User avatar
roliboni
Posts: 7
Joined: Wed Apr 11, 2007 2:24 am
Location: Luxembourg

Post by roliboni »

Hi Dan, that was it which I wanted. That is exactly the correct picture which I for avatar had planned. Thank you.

and hello John

Those valences are really difficult to find. Also with ebay it is difficult. The condition is not important in principle. I have the possibility of preparing it again.

(sorry for my english, it´s not the best :oops: )


Roland
Mopar or no car ;O)
Top
User avatar
tomf
Posts: 196
Joined: Wed Apr 14, 2004 10:14 pm
Location: Roseburg, Oregon

Post by tomf »

Hi Roland,
I have the top part of the front valance, but not the lower part.
Tom Fox
Top
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Post by rogerh »

I too have the "shelves"...I have two, buyt shipping such a large part abroad is too expensive. I gave away a smashed valance some years ago and I think the guy never did anything with it. I should phone him...
Top
matty
Posts: 123
Joined: Mon May 01, 2006 2:40 am

Post by matty »

These lower valence sections appear to be really rare parts commanding quite large ammounts of cash! :shock:
I am also looking for the same item, i bid on that one on ebay up to over $400 and still no joy, outbid again! :(
I suppose i will just have to keep looking eh?
Which one of you lucky lot got the valence then?
Top
Zeus
Posts: 26
Joined: Thu Apr 05, 2007 10:39 am
Location: Four Oaks, NC

Post by Zeus »

I still have the original upper and lower valance although, I need to "rework" the lower since there are dents in it. Guess I'm a "lucky one" but not from bidding on ebay!
Gary "Zeus" Smith
Four Oaks, NC
Image
'59 Plymouth Savoy
Top
User avatar
roliboni
Posts: 7
Joined: Wed Apr 11, 2007 2:24 am
Location: Luxembourg

i am the winner

Post by roliboni »

sorry matty, :roll:

i was the winner. 8)

Before the parts become ever more expensive, I invested a little more. :wink:
Mopar or no car ;O)
Top
Post Reply

Return to “Wanted”