Page 1 of 1
New to site
Posted: Sun Jun 26, 2016 8:51 am
by Gene
Hello everyone. My name is Gene Petrini and I live in "Hell on Earth" Mesa Arizona. I have been a Mopar guy for many years and am currently working on a 59 Sport Fury Convertible. I am in need of a complete convertible top, can be rusty, bows, rails frame. I believe a 57, 58, or 59 Mopar will work. Also need a complete engine and tranny with two fours set up with air cleaners. Any help would be much appreciated.
Re: New to site
Posted: Sun Jun 26, 2016 11:17 am
by Faulkner
Welcome Gene!
Your best friend when it comes to parts is John Fowlie ("Big M"), whose contact info can be found
here. Give him a shout. Regarding the dual quad setup, prepare for sticker shock!
But some on this site (notably, Matthew Keij) have gathered parts here and there and built from scratch.
Glad to have you aboard!
Dan
Re: New to site
Posted: Sun Jun 26, 2016 9:55 pm
by Dick Koch
Hi Gene, welcome. Do you have any engine at all and if so is it the 318 or the 361 CI.
Dick
Re: New to site
Posted: Sun Jun 26, 2016 10:05 pm
by Faulkner
Dick sends this complete dual quad setup for a 318. Yow!!
http://www.ebay.com/itm/322166216448
And also this:
http://www.ebay.com/itm/331874730633
Does this manifold fit a 361, Dick?
Re: New to site
Posted: Mon Jun 27, 2016 6:56 am
by Mark Merritt
Gene; Welcome, good bunch on this site. Mark
Re: New to site
Posted: Mon Jun 27, 2016 10:35 am
by Gene
Dick, my 59 does not have an engine or tranny. I am looking for a 361 Golden Commando. Thank you all for the welcome!
Re: New to site
Posted: Mon Jun 27, 2016 12:19 pm
by Matthew Keij
Welcome!
Any more info on your Sport Fury?
If you can send me the VIN I can decode it for you and put it in my SF database.
I did build a dual quad setup from scratch recently
Re: New to site
Posted: Mon Jun 27, 2016 1:06 pm
by Faulkner
Gene, talking about build from scratch, this just in...
Dick Koch wrote:
Look at this on eBay
http://www.ebay.com/itm/191680011371
Dan, this is a better and cheaper manifold than the first one l sent you. And yes it will fit a 361.
Dick
Re: New to site
Posted: Mon Jun 27, 2016 2:23 pm
by Matthew Keij
Still expensive! I got mine for $200.
1827899 is what you are looking for
Re: New to site
Posted: Tue Jun 28, 2016 8:12 am
by Faulkner
...and the
air cleaner covers! Ka-ching, Ka-ching...
Dan
Re: New to site
Posted: Tue Jun 28, 2016 3:30 pm
by Matthew Keij
They are the worst! But they can be found easily
Re: New to site
Posted: Tue Jun 28, 2016 3:50 pm
by Dick Koch
And the carburetors, and the linkage, and the filters, and the new manifold gaskets and the manifold paint. Ka-ching, Ka-ching.
Re: New to site
Posted: Tue Jun 28, 2016 4:10 pm
by Matthew Keij
Filters are easy, K&N are making them now.
Linkage, choke tube, choke assy can be bought brand new these days, just like the air cleaners.
Throttle return springs and brackets, carb spacers are also available new.
I converted 2 normal 4 barrel carbs to dual quad carbs and they work!
Re: New to site
Posted: Tue Jun 28, 2016 5:26 pm
by Dick Koch
Matt, let us know where that stuff can be sourced new, please.
Thanks,
Dick