Page 1 of 1
control arm bushing
Posted: Thu Mar 24, 2016 7:05 pm
by LEONARD
to replace control arm bushings do i need to slack off the torsion bars.
Re: control arm bushing
Posted: Fri Mar 25, 2016 6:54 pm
by Mark Merritt
Leonard; to replace the upper/lower control arm bushings you want to take the torsion arm off,and the ball joint. The bushings are pressed in and need to be pressed out. Mark
Re: control arm bushing
Posted: Sun Mar 27, 2016 5:14 pm
by LEONARD
Thanks Mark.