Sport Fury Interior



Got a question? This is the place to ask
Post Reply
vic barone
Posts: 164
Joined: Mon May 08, 2006 4:50 am
Location: Adelaide South Australia

Sport Fury Interior

Post by vic barone »

Hi all

Does anyone know where to get interior templates or even if ithey exist

Not aware of any on line

Looking to start the interior and just want to make sure I get the right proportions / patterns etc

I have lots of photos but if there were templates available reckon this would make life easier

Cheers

Vic
User avatar
Dick Koch
Posts: 2217
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Re: Sport Fury Interior

Post by Dick Koch »

Hi Vic. - Your needing templates tell me you plan on doing the upholstery yourself. Good luck because I never heard of Templates for the interior. Any good commercial upholster worth their salt either don't need them or possibly could make them for you.
Dick.
Life is Beautiful! Sex, Beer & Mopars.
User avatar
Denver 59 Fin Convert
Posts: 2139
Joined: Tue May 16, 2006 10:57 pm
Location: Arvada, Colorado
Contact:

Re: Sport Fury Interior

Post by Denver 59 Fin Convert »

Vic, I took loads of pictures of original car seats and he did a super job in figuring it out proportion wise all the cuts and seams. I would do the same to your local guy or I can get you the name of my guy and you can send your seats to him.....Expensive freight wise to do so but it might be worth it.


John Q.
John Quinn
Arvada, Colo
(NW suburb of Denver)

"Chrysler Corporation-Extra Care in Engineering"
http://www.flickr.com/photos/56963213@N ... 457983491/
vic barone
Posts: 164
Joined: Mon May 08, 2006 4:50 am
Location: Adelaide South Australia

Re: Sport Fury Interior

Post by vic barone »

Thanks Guys

I have been collecting loots of photos as i thought that this would be the case

As i will be doing the copper bronze colour scheme i was wondering what the original colour the back of the front seats was.

I was of the opinion that it was the dark brown as per the floor carpet and bottom of the door panel

Do you think this is correct?

I see a few different variations on the net/site

Cheers
Post Reply