Page 1 of 1
sun visor
Posted: Fri Jan 24, 2014 4:16 am
by dodgebrothers
We are rounding the final stretch on our SF and found we are missing one whole sunvisor. Apparently these are sport fury only as all the rest of the cars we have are completely different. Anyone have any ideas on where to find something like this? Thanks. Ken
Re: sun visor
Posted: Fri Jan 24, 2014 4:05 pm
by Dick Koch
There are a ton of them on ebay. Do a search for 59 Plymouth parts and accessories sun visor.
Dick.
Re: sun visor
Posted: Fri Jan 24, 2014 7:29 pm
by dodgebrothers
Thanks
I also need the metal arm that bolts to the roof.
Thanks again
Ken
Re: sun visor
Posted: Sat Jan 25, 2014 5:38 am
by Dick Koch
Ken - As far as I know the only arm assy that was different was for the convertible. the base plate where it screws to the header was different on the convertible, it was longer and had a rod on the end that fits in a holder. Everything else had no rod and no holder and was shorter. If you go on ebay there should be some visors with the metal arm in them. If not contact John Fowlie at BIG M.
bigmauto@calusanet.com. he has several 59's in his yard.
Dick.
Re: sun visor
Posted: Sat Jan 25, 2014 8:57 am
by Denver 59 Fin Convert
Dick, is spot on, the convertible arm on the sun visor is unique to the convertible. Very hard to locate with convertibles parts being so scarce. Not impossible but tough to find.
Calling on Matthew Keij... do you think Jim Hampsher (SP?) might have any of these? Jim would be my most likely source of spare convertible parts?
Re: sun visor
Posted: Sat Jan 25, 2014 5:52 pm
by Dick Koch
DUH. John - I dun gottem from Jim Hamsher, I be one lucky guy. The ones I had I sent to John Fowlie along with a brand new set of Convertible visors I got on ebay. They are the same as Desoto or Dodge convertible. The base (part that screws to header but without rod) I got a pair of beautiful reproductions from Gary Goers. Catalog 10, page 51, part #CHR13 SUNVISOR MOUNTING PLATES 58 - 59 ALL MAKES CVT L OR R. $37.00 EA.
Dick.
Re: sun visor
Posted: Sat Jan 25, 2014 6:53 pm
by dodgebrothers
My SF is a hardtop and only had one visor when we got it. It is kind of rounded like a 3 leaf clover, but the ones in our other cars have a square base that attaches to the roof. It looked like they had a different bolt pattern but didn't take one off to check. That is why I figured that SF was different. I will have to check.
Re: sun visor
Posted: Sun Jan 26, 2014 1:30 pm
by Denver 59 Fin Convert
Duh? Gosh Dick that hurt!! LOL Good to know it is the a HT that he looking for and not the convertible style. John Fowlie should have them/
John Q.
Re: sun visor
Posted: Sun Jan 26, 2014 2:02 pm
by Matthew Keij
John Fowlie has at least 1 SF hardtop.
The ones I had for the Fury were different if I remember correctly.
Dont know if Sedan and hardtop sun visors are different