Engine paint & brakes



Got a question? This is the place to ask
Oldschoolcarguy
Posts: 44
Joined: Sat Jan 09, 2010 9:41 am

Engine paint & brakes

Post by Oldschoolcarguy »

Fellow 59er's,
I'm cleaning up under the hood of my 318 Sport Fury and trying to find the correct factory colors. Can anyone tell me what color the valve covers, power steering pump, block, intake etc. are suppossed to be?
Any help would be greatly appreciated.

Also,
Where are you buying your brake shoes from? I see them for sale on Ebay but there seems to be a couple different sizes.
What exactly am I measuring to determine what size brake shoes I need, and is there an aftermarket source or os Ebay the way to go?

Thanks!

Ernie D.
"Oldschool is cool"

Ernie D.
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Engine paint & brakes

Post by rogerh »

Ernie,
My car had the correct color engine when I sold it. The 318 block and intake should be silver, precisely what paint code I don't know. The aircleaner and valve covers should be red. The p/s pump has no color. Generator is black.
As for brakes, most came with 11" x 2" shoes, but I recently learned that 12" x 2 1/2" were also available.
Within these choices, there are two types..according to the Mopar parts Book, which were called BRAKE and THREE-PLATFORM-TYPE.
Studying the diagrams in the Book, the way to tell them apart is the latter shoes are retained by coilsprings set in cup washers. The former type are held in place by a single flatter piece of spring metal and a small wire retainer.
Yes, I know that pictures are worth a thousand words, but I hesitate to cut apart my Parts Book in order to scan it for you.
I've purchased brake parts from Napa Autp Parts, also Andy Bernbaum (www.oldmoparts.com).
The brakes in '59 can be problematic. New shoes need to "wear in" to fit well to well-used drums. Oftentimes, the shoes grab and pull. This problem can be minimized by having the new shoes fitted to the specific drum. Costs more, and it can be a royal pain to pull the rear drums off (rent a good hub puller), but the result is worth the effort. Try the new shoes first, and if you get the grab and pull, you know what you have to do.
Oldschoolcarguy
Posts: 44
Joined: Sat Jan 09, 2010 9:41 am

Re: Engine paint & brakes

Post by Oldschoolcarguy »

Thanks Roger,
By the way, The 59 Belvedere found a new owner at the Turkey Run at Daytona Speedway this year. The guy is from the Ft. Lauderdale Fl area. He said he plans to keep her as-is. I put over 5 thousand miles on that car the year I owned her and she ran like a top. Tune up and new battery only!

I appreciate the feedback on the brakes too - but let me ask this specificaly: Is there a source for buying brake shoes or do I need to shop Ebay for them?

Thanks again.

OH! - ALSO - How do i download photos of my ride for the Showcase on this site?

Ernie
"Oldschool is cool"

Ernie D.
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Engine paint & brakes

Post by rogerh »

hi Ernie,
so the ol' gal is off to a new owner. Glad she served you well while you had her.
You may have missed it in my prior email, but walk into Napa Auto Parts and tell them your car needs shoes. I believe they want your old ones in on trade.
To get pix onto Showcase, you gotta go thru Dan Morton, webmaster. Do you have his address?
User avatar
Faulkner
Posts: 5132
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Engine paint & brakes

Post by Faulkner »

Roger's correct, Ernie -- to get in the Showcase, I have to build a webpage for you. And I'm seriously behind in my webpage building...

But if you want to post pix in the "show your ride" section of this forum, here's a related post:

https://59plymouth.net/59forum/viewtopi ... 6305#p6305

Best of luck!
Dan
"If it's new, Plymouth's got it!"
Oldschoolcarguy
Posts: 44
Joined: Sat Jan 09, 2010 9:41 am

Re: Engine paint & brakes

Post by Oldschoolcarguy »

Thanks again Roger, and thanks Dan.
The plan is to keep the Sport Fury for a few decades so I will wait patiently for you to build a site for her. Meanwhile, I will attach a couple of photos of "the girls" here.
PIC_0356.JPG
"Marilyn" in black & "Nadine" in red
"Oldschool is cool"

Ernie D.
User avatar
Fins59
Posts: 352
Joined: Wed Mar 17, 2004 10:12 pm
Location: Kronenwetter, Wis......just south of Wausau

Re: Engine paint & brakes

Post by Fins59 »

rogerh wrote:Ernie,
My car had the correct color engine when I sold it. The 318 block and intake should be silver, precisely what paint code I don't know. The aircleaner and valve covers should be red. The p/s pump has no color. Generator is black.
As for brakes, most came with 11" x 2" shoes, but I recently learned that 12" x 2 1/2" were also available.
Within these choices, there are two types..according to the Mopar parts Book, which were called BRAKE and THREE-PLATFORM-TYPE.
Studying the diagrams in the Book, the way to tell them apart is the latter shoes are retained by coilsprings set in cup washers. The former type are held in place by a single flatter piece of spring metal and a small wire retainer.
Yes, I know that pictures are worth a thousand words, but I hesitate to cut apart my Parts Book in order to scan it for you.
I've purchased brake parts from Napa Autp Parts, also Andy Bernbaum (http://www.oldmoparts.com).
The brakes in '59 can be problematic. New shoes need to "wear in" to fit well to well-used drums. Oftentimes, the shoes grab and pull. This problem can be minimized by having the new shoes fitted to the specific drum. Costs more, and it can be a royal pain to pull the rear drums off (rent a good hub puller), but the result is worth the effort. Try the new shoes first, and if you get the grab and pull, you know what you have to do.
Roger - Aren't valve covers on a 318 engine supposed to be silver? Correct me if I'm wrong. I'll repaint mine :)
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Engine paint & brakes

Post by rogerh »

I hereby resign from attempting to advise on 318's. I don't have a 318-powered car, and thus i have forgotten the details of such! I apologise if I've recently misled anyone, with bad advice.
Thank you for standing guard, John. :(
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Engine paint & brakes

Post by rogerh »

By the way, Fins59 is correct...the entire block should be silver, with red aircleaner.
User avatar
Dick Koch
Posts: 2217
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Re: Engine paint & brakes

Post by Dick Koch »

To make sure you have the three platform brakes shoes they have 3 flat V shaped metal thingies along the edge that ride on 3 raised areas on the backing plate (dust shield). The areas take a small amout of white grease for smooth operation. I found out he hard way on my Desoto, half the shoes were different from the the three platform type and resulted in pulling and strange noises.
Dick.
Life is Beautiful! Sex, Beer & Mopars.
User avatar
Fins59
Posts: 352
Joined: Wed Mar 17, 2004 10:12 pm
Location: Kronenwetter, Wis......just south of Wausau

Re: Engine paint & brakes

Post by Fins59 »

rogerh wrote:By the way, Fins59 is correct...the entire block should be silver, with red aircleaner.
Hood springs should also be red. I always thought that was a nice touch. Kind of balances out with the air cleaner. Anybody ever try and paint these. I did one time. I stretched them apart in a vise somehow. I heard somewhere of guys using an engine hoist to stretch them. I think that would be easier and safer. Didn't have one at the time but do now so next time will do it that way.
User avatar
Steve Storey
Posts: 270
Joined: Sat Sep 13, 2008 6:05 am
Location: 15 Maple Ave.,Sidney,NY 13838-Southern Tier of NY
Contact:

Re: Engine paint & brakes

Post by Steve Storey »

I recently bought an install tool for some hood springs and the instructions suggested I stretch them using a floor jack. I tried it and it worked great. I think I hooked one end in the axel and one on the lift plate.
User avatar
Denver 59 Fin Convert
Posts: 2139
Joined: Tue May 16, 2006 10:57 pm
Location: Arvada, Colorado
Contact:

Re: Engine paint & brakes

Post by Denver 59 Fin Convert »

I have just painted my hood springs and I used the engine lift method also, If you have a "come-a-along" ratchet device and two places to anchor it, that would work too to stretch the spring.

Installation of the springs back on the hinge assembly is a trick. To do this without prying or scratching the paint. After the paint dries and still under tension by your stretching device, put 6 or more thick wedges in between springs leaves and then release the stretching of the springs. This will allow the spprings to be in a slightly stretched position that you can then place the springs back on its hood hinges that is mounted on the car with the hood on. Wedges can be floor tile or anything with a 1/8 thicknes or so that won't mar the paint on the springs when it is allowed to compress.

The the hood must be at a opening angle of approx. 100 degrees or more. After placing the springs in its position at both points on the hood hinges, open the hood more, which stretches the spring more and that will allow you to take the wedges out. I read about this trick at the Forward Look Forum.

Pretty neat!

John Q.
John Quinn
Arvada, Colo
(NW suburb of Denver)

"Chrysler Corporation-Extra Care in Engineering"
http://www.flickr.com/photos/56963213@N ... 457983491/
User avatar
savvy59
Posts: 344
Joined: Mon Feb 13, 2006 12:18 pm
Location: Ellicott City MD

Re: Engine paint & brakes

Post by savvy59 »

Denver 59 Fin Convert wrote:The the hood must be at a opening angle of approx. 100 degrees or more. After placing the springs in its position at both points on the hood hinges, open the hood more, which stretches the spring more and that will allow you to take the wedges out. I read about this trick at the Forward Look Forum.
John Q.

John did you really mean 100 degrees - that would put the hood back almost on top of the windshield?
Did the red springs only come on V8 equipped cars? I am sure my springs are original on my 6 cylinder Savoy and quite sure they were never painted red.

Curt
angle.gif
I can't picture my hood at 100 degrees to install the springs?
There's Nothing Finer Than My '59er!
User avatar
Faulkner
Posts: 5132
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Engine paint & brakes

Post by Faulkner »

He meant "Arvada, Colorado" degrees, Curt. Remember it gets pretty d*mn cold out there. :lol:
"If it's new, Plymouth's got it!"
Post Reply