361 - Project

sportfury1959 · Post by **sportfury1959** » Thu Mar 27, 2008 5:56 am

Well, all work comes to an end. I thought I assembel the engine for a nice final picture, but there are still too many parts missing or not ready yet.

sportfury1959 · Post by **sportfury1959** » Thu Mar 27, 2008 6:00 am

The carburettors are not yet assembled, oil cabs and PS-pump are still without the propper paint, but the engine is ready to be installed. My only concern is that the motor mounts will not fit.

sportfury1959 · Post by **sportfury1959** » Thu Mar 27, 2008 6:09 am

This is as far as it get's for now. Carburettor overhaul and reassembling as well as the Pertronix-convertion of the Distributor and some other features are part of this project but I’ll show that later in another topic. For now it’s time to get the engine in the car.

sportfury1959 · Post by **sportfury1959** » Thu Apr 03, 2008 5:19 am

- pull the 318

- remove bell housing

- strip the 361 again - less weight - easier work

sportfury1959 · Post by **sportfury1959** » Thu Apr 03, 2008 5:20 am

- almost in place

sportfury1959 · Post by **sportfury1959** » Thu Apr 03, 2008 5:23 am

- S * * * ..... the motor mounts don't fit.

What now ?

sportfury1959 · Post by **sportfury1959** » Wed Apr 23, 2008 10:23 am

Finally, after two weeks I have the motor mounts right where I wanted them to be. I spent 105 $ at the first blacksmith. He placed the hangers in the middle but then the oil pan was laying on the cross member. Then I spent another 15 $ and did it myself - Now it is perfect.

sportfury1959 · Post by **sportfury1959** » Wed Apr 23, 2008 10:29 am

And while I'm waiting for some parts comming in from California I do some small works:

The valve cover bolts need a new heli coil insert

remove the old mufflers and put a pair of new KYB shocks in the front end

- well, a pair of Smitties should take care of the sound.

rogerh · Post by **rogerh** » Thu Apr 24, 2008 11:50 pm

It all looks beautiful!

sportfury1959 · Post by **sportfury1959** » Wed May 14, 2008 7:43 am

Tanks Roger!

of course let's hope that the engine runs like it looks

Meanwhile I go for the carburetor - here some pictures for you guys.

sportfury1959 · Post by **sportfury1959** » Wed May 14, 2008 7:47 am

- and more pictures ...

sportfury1959 · Post by **sportfury1959** » Wed May 14, 2008 8:07 am

- the only way is to take it apart - completely.

- I couldn't figured out how it is possible to get so much carbon inside the carburetor?

sportfury1959 · Post by **sportfury1959** » Wed May 14, 2008 9:26 am

- after a couple of days in a bath the surface rust came mostly off

- it went to a cinc bath

- nice and shiny - ready to be installed again.

sportfury1959 · Post by **sportfury1959** » Wed May 14, 2008 9:33 am

- Carburetors fresh paint

- and cleanded

- new gaskets

sportfury1959 · Post by **sportfury1959** » Thu May 15, 2008 4:09 am

- mechanism adjustment

- in my living room - kids and men are the same

- detailed pictures - what a difference!

Click the Facebook icon to log in with Facebook, and enable posts and replies!

361 - Project