Exhaust Hangers Wanted, Need any pcs.

[Mark Evans]

I am looking for a Set or Pcs. of Exhaust Hangers.
Please advise any for sale or trade .
Any Leads for sources appreciated
Mark Evans

[Denver 59 Fin Convert]

Mark, mid car exhaust hangers under the rear seat area or the exhaust tail pipe hangers under the trunk area?


John Q.

[rogerh]

Attachment contains exhaust diagram from Parts Book.
There are support brackets, and there are hangers with flexible links.
Used support brackets should be available from John Fowlie, or anyone with a parts car.
I assume you need the flexible hangers...
Front hangers= P/N 1943-934
Tailpipe hangers= P/N 1820-590
I would think that flexible hangers are available from your local muffler shop.
If you want to go factory original, you could try your local Mopar dealer, or an NOS supplier (such as Len Dawson in Anacortes, WA, Andy Bernbaum in MA, etc).
I'm not sure if NOS suppliers are listed in the Vendor Section.

[Denver 59 Fin Convert]

Roger, this is spot on! Good job in posting the diagram. That helps a bunch to pick which one Mark needs.


John Q.

[Mark Evans]

I need a complete Hanger set and I am going with the All Orig Resto
I will go on the hunt as you recommended
Thanks to all
I am sure I will be back for more help,The fun is just beginning.
Mark

[rogerh]

Ten to fifteen years ago when the Internet wasnt in everybody's home, it was a huge challenge to find parts. Nowadays folks have good success Googling their part needs, also having eBay watch for their parts.
On ebay now, i see rubber strap hangers (Item # 2500 5609 4337).
Try Googling NOS Mopar Parts-

[rogerh]

I thought it was easier to cut the page out of my parts book and scan it, but the exhuat diagram is also available at
59plymouth.net/59gallery.
Click on ephemera>print>service manual>57-8 servicemanual>fuel and exhaust and scroll ALL the way down to p. 402

[Mark Evans]

I was able to buy the Flex Exh Hangers on ebay ,Thanks to the Forum Tip

Now I need the 4 Frame hangers
Anybody with a Parts Car out There?
Mark

[rogerh]

I can think of two Listmembers with parts cars, but both of them are working on restorations, so they are probably not ready to give up parts.
John Fowlie (bigmauto@colusanet.com) will have the brackets, and at a very fair price.
The flex hangers from ebay will be correct for the tailpipes at the rear axle, but they are not precisely correct for the rear of muffler (see earlier PDF).
While few would notice, if you are striving for correctness, ask John Fowlie if he has these, even some crappy ones. Maybe you could use it as a pattern to make a new pair, as a one-year-only hanger is going to be tough to find.
And again, search the Internet for NOS Mopar Suppliers. Valley Vintage, Atlas, Andy Bernbaum, etc.

[rogerh]

Mark,
I believe you'll find your parts at:
collectors auto supply. just type in the part # (I already checked, and he has the parts)