Right Side Parking Lamp Grill Wanted
-
- Posts: 127
- Joined: Wed Feb 25, 2009 4:48 pm
- Location: Woodbury Ct
Right Side Parking Lamp Grill Wanted
I am looking for a Right Side Parking Lamp Grill in Good to Mint shape, Mine is damaged
Please advise if you have leads
Mark Evans
Please advise if you have leads
Mark Evans
- Denver 59 Fin Convert
- Posts: 2139
- Joined: Tue May 16, 2006 10:57 pm
- Location: Arvada, Colorado
- Contact:
Re: Right Side Parking Lamp Grill Wanted
Mark, I will check my spares, I think I have a grill right side for you, if not John F. would have them too.
Is yours a smooth style of finish or with the groves in it?
John Q.
Is yours a smooth style of finish or with the groves in it?
John Q.
John Quinn
Arvada, Colo
(NW suburb of Denver)
"Chrysler Corporation-Extra Care in Engineering"
http://www.flickr.com/photos/56963213@N ... 457983491/
Arvada, Colo
(NW suburb of Denver)
"Chrysler Corporation-Extra Care in Engineering"
http://www.flickr.com/photos/56963213@N ... 457983491/
- Denver 59 Fin Convert
- Posts: 2139
- Joined: Tue May 16, 2006 10:57 pm
- Location: Arvada, Colorado
- Contact:
Re: Right Side Parking Lamp Grill Wanted
John Quinn
Arvada, Colo
(NW suburb of Denver)
"Chrysler Corporation-Extra Care in Engineering"
http://www.flickr.com/photos/56963213@N ... 457983491/
Arvada, Colo
(NW suburb of Denver)
"Chrysler Corporation-Extra Care in Engineering"
http://www.flickr.com/photos/56963213@N ... 457983491/
-
- Posts: 127
- Joined: Wed Feb 25, 2009 4:48 pm
- Location: Woodbury Ct
Re: Right Side Parking Lamp Grill Wanted
John,
Thanks,
I have the type that is shown in the ebay link you posted, I would call them the Groove type
I have an NOS left side.I will watch the ebay ,However I did not to buy the other unwanted items .
If you have a good left Please let me know,If not I will call John F
Mark
Thanks,
I have the type that is shown in the ebay link you posted, I would call them the Groove type
I have an NOS left side.I will watch the ebay ,However I did not to buy the other unwanted items .
If you have a good left Please let me know,If not I will call John F
Mark
-
- Posts: 4
- Joined: Mon Aug 30, 2010 7:55 pm
- Location: Granby, MA
- Contact:
Re: Right Side Parking Lamp Grill Wanted
yes, hello guys, i just came across this forum subject, and actually, i need one of the exact same pieces, the passenger side blinker cover, my front end of mine must have been moderately hit a while ago, and all that's left of that lamp cover is the two screws. over here in Massachusetts, you cant get the car registered with any exposed bulb on the car, such as blinkers, ect, so i just got the motor, brakes, exhaust done, and i cant drive the car until i get the blinker cover, which is completely ridiculous i think. so i need the passenger blinker cover, the one with the ridges in it. so any ideas where i could get one, that would be great, i tried ebay, but there was only a left side, and for 125 bucks. but a set would be nice if possible
Re: Right Side Parking Lamp Grill Wanted
Mark is looking for an aluminum grille section, while Granby fury is looking for a turn signal lens. For the lens, try an NOS supplier...several listed elsewhere on this site, start with Collectors Auto supply. If you will accept a used lens with the cracks caused by age and heat, contact John Fowlie at Big M.
-
- Posts: 127
- Joined: Wed Feb 25, 2009 4:48 pm
- Location: Woodbury Ct
Re: Right Side Parking Lamp Grill Wanted
I am all set with my Grill items,thanks to all the help from the forum, Ebay and John F
My parts are at the Anodize shop.
I do have an old cracked parking lens if that works for you.Let me know.
I am looking for a left side Rear Tail light main housings that is not cracked and can be replated if anybody know of one
My parts are at the Anodize shop.
I do have an old cracked parking lens if that works for you.Let me know.
I am looking for a left side Rear Tail light main housings that is not cracked and can be replated if anybody know of one
Re: Right Side Parking Lamp Grill Wanted
Everybody - I've seen ads for mopar parts from Len Dawson www.dpmotorparts.com in several magazines. My Belvie conv. needs rocker moulding that go under the doors, I had the right side but not the left. He had several NOS left side at $95.00 ea. I also needed a left hand exterior door handle for Reddie and he had a NOS for $40.00. I have received them and they are excellent. The mouldings on ebay run $300.00 plus and the door handles on ebay are almost always incomplete. I suggest you give Len a try for any parts you need.
Dick.
Dick.
Life is Beautiful! Sex, Beer & Mopars.