Re-anodizing parts



Got a question? This is the place to ask
User avatar
Fins59
Posts: 352
Joined: Wed Mar 17, 2004 10:12 pm
Location: Kronenwetter, Wis......just south of Wausau

Re: Re-anodizing parts

Post by Fins59 »

Dick Koch wrote:John - If you are listening will you look at my post on Tech support - Air Cond. Thermostat Switch and see if you can help me out.
Dick.
Dick - posted msg on your a/c post. John Z
Oldschoolcarguy
Posts: 44
Joined: Sat Jan 09, 2010 9:41 am

Re: Re-anodizing parts

Post by Oldschoolcarguy »

Fins59 wrote:Oldschoolguy - Just noticed on the rear of your car the Sport Fury script. This has probably been discussed before but I might have missed it.
Anyway, you must have bought this car from George Dalinas. I first noticed this car in "The Plymouth Bulletin" No 199.
I put a Sport Fury script on the rear of my car too, but it is on the trunk lid on the right side. There was already 2 holes there, probably from a dealer logo, so I used one of these holes for the script and the other one is covered by it.
I got the idea from George's (your) car.
I figured if a Plymouth Owners Club 1959 Technical Advisor can do it, so can I :D

Tell me about this Plymouth bulliten 199. What is it and where do I find it? I bought the car off of Ebay about a year and a half back. It was located in Memphis tenn - not sure if the owner was George Dalinas or not? The previous owner said he had bought it 4 years earlier from a guy that was some sort of Plymouth car club presdent or somthing ouyt of Chicago. Anyway - I haven't seen these sripts on other 59's and was wondering if it was "correct" or not. Also - If anyone has any backround info on this particular car I would love to learn about its history.

"Oldschool is cool"

Ernie
"Oldschool is cool"

Ernie D.
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Re-anodizing parts

Post by rogerh »

Hello Ernie,
Roger here, you bought my Belvedere-Fury wannabee.
George Dalinis of Chicago had two (maybe three?) '59 Plymouths. First he restored a hardtop, then his friends challenged him to resurrect a Belv cvt he found in a salvage yard.
As he restored the Belv, he made the decision to upgrade it to a Sport Fury with spare parts he had. The PB article gives details.
I don't know which car you have.
The Plymouth Bulletin is a product of the Plymouth Owners Club, PO Box 416, Cavalier, ND. 58220.
While the Club does offer back issues of their publication, they do not have any spare copies of #199. There may be some club members on this list who have that issue...and maybe they will write in. (I thought I had a copy, but I can't find it.)
Oldschoolcarguy
Posts: 44
Joined: Sat Jan 09, 2010 9:41 am

Re: Re-anodizing parts

Post by Oldschoolcarguy »

Hey Roger,
Thanks for the reply.
That's interesting - and fits with what the guy I bought the car from said. Was George a well known guy around here? Do we know what became of him? I decoded the VIN and it shows mine to be a true SF. I would love to learn whether the now 54,000 miles showing on the odometer is the second, third, or even fouth time around?

Hoping to hear from someone with # 199!!!!!

"Oldschool is cool"

Ernie D
"Oldschool is cool"

Ernie D.
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Re-anodizing parts

Post by rogerh »

It's been a few years, but George needed to sell his cars due to failing eyesight. He would be in his upper 80's if he is still "with us"..
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Re-anodizing parts

Post by rogerh »

I don't think Tom Fox or John Zastrow would mind if I gave their names as folks who may have #199 at home. I'm pretty sure George served as Technical Advisor for 1959 Plymouths in the Plymouth Bulletin for many years.
User avatar
Fins59
Posts: 352
Joined: Wed Mar 17, 2004 10:12 pm
Location: Kronenwetter, Wis......just south of Wausau

Re: Re-anodizing parts

Post by Fins59 »

I do have #199. Seeing it is no longer available and very rare and desirable I am offering it for sale. Any offers over 500 will be considered.
Just kidding. Sounds like something John Q would say :)
I thought back in the day when Dan was starting this site I told him about this copy and he said he was going to get one, or was it Ed Eckerson.
If Dan has one maybe he knows how to get that article to you. I don't know how.
Anyway, that Sport Fury script on rear of car is not factory or original. That probably came off of a '65 Sport Fury or thereabouts. But when I saw it in the bulletin I thought it was kind of neat. At car shows everybody calls the Sport Fury a Fury because of the script on rear sides. So this way it helps clarify it a little bit.
John Z
User avatar
Faulkner
Posts: 5079
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Re-anodizing parts

Post by Faulkner »

Time to 'fess up. I do have the article! I just have to scan it, then convert to a pdf, then upload... And my time is not my own at the moment. Keep pestering me, I'll get to it!

Dan
"If it's new, Plymouth's got it!"
User avatar
Denver 59 Fin Convert
Posts: 2139
Joined: Tue May 16, 2006 10:57 pm
Location: Arvada, Colorado
Contact:

Re: Re-anodizing parts

Post by Denver 59 Fin Convert »

Fins59 wrote:I do have #199. Seeing it is no longer available and very rare and desirable I am offering it for sale. Any offers over 500 will be considered.
Just kidding. Sounds like something John Q would say :)
I thought back in the day when Dan was starting this site I told him about this copy and he said he was going to get one, or was it Ed Eckerson.
If Dan has one maybe he knows how to get that article to you. I don't know how.
Anyway, that Sport Fury script on rear of car is not factory or original. That probably came off of a '65 Sport Fury or thereabouts. But when I saw it in the bulletin I thought it was kind of neat. At car shows everybody calls the Sport Fury a Fury because of the script on rear sides. So this way it helps clarify it a little bit.
John Z
Gosh, I would say that too! Guess my humor level of a little kidding and flamboyance in my Postings shine thru!! :lol:

John Q.
John Quinn
Arvada, Colo
(NW suburb of Denver)

"Chrysler Corporation-Extra Care in Engineering"
http://www.flickr.com/photos/56963213@N ... 457983491/
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Re-anodizing parts

Post by rogerh »

John, you have already been tagged as a jovial kidder type. Keep it up!
User avatar
Denver 59 Fin Convert
Posts: 2139
Joined: Tue May 16, 2006 10:57 pm
Location: Arvada, Colorado
Contact:

Re: Re-anodizing parts

Post by Denver 59 Fin Convert »

Thanks Roger! I am what I am I guess. Was the class clown in HS and still am today I guess.

John Q.
John Quinn
Arvada, Colo
(NW suburb of Denver)

"Chrysler Corporation-Extra Care in Engineering"
http://www.flickr.com/photos/56963213@N ... 457983491/
User avatar
Faulkner
Posts: 5079
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Re-anodizing parts

Post by Faulkner »

Fins59 wrote:I thought back in the day when Dan was starting this site I told him about this copy and he said he was going to get one, or was it Ed Eckerson. If Dan has one maybe he knows how to get that article to you. I don't know how.
OK - it's not the greatest quality, I did it on the copier at work so i didn't have to futz with it. I can improve it a bit, but in '93 the magazine was not all that great quality anyway, and a lot of the pictures were already very dark. One day I'll work on improving the scan and lightening up the images, but at least you can read the article.

Dan

P.S. - despite the quality, you can clearly see the "SportFury" emblem affixed to the rear! And the caption calls it out
20101005082606142.pdf
Story on Dalinas' '59's
"If it's new, Plymouth's got it!"
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Re-anodizing parts

Post by rogerh »

Because it interests ("possesses"?) me about my car, I wonder if George switched over the wheelwells so that the hardtop got the cvt wheelwells. No mention of them in the article.
Oldschoolcarguy
Posts: 44
Joined: Sat Jan 09, 2010 9:41 am

Re: Re-anodizing parts

Post by Oldschoolcarguy »

Dan,
Thanks SO much for the scan! So - that's my 59. . . . . How very cool! Um - Who's gonna sell me there copy of good ole' 199? :roll:

Roger,
Did you buy your drop top from George? whaddaya mean about the wheelwells?

"Oldschool is cool"

Ernie D.
"Oldschool is cool"

Ernie D.
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Re-anodizing parts

Post by rogerh »

Do you remember that you also bought my Belvedere HT that looked sort of like Christine...
I took a similar route that Geroge Dalinis took...I bought a completely rusted Belv Cvt and hired a body man to graft the cvt stuff to a HT body. What my body man forgot to do was to use the rear wheeel wells from the cvt....as a result something binds up when we fold the top down, thus it won't go down as far as an original convertible top would. Looks sort of bogus.
I have sold the car to Ron Keij of the Netherlands...so maybe he will deal with the issue.
Post Reply