My car.
Posted: Sun Apr 29, 2007 6:46 am
The cars a bit further on than this so i will get some more picks.
Page 1 of 6
Posted: Sun Apr 29, 2007 6:47 am
HERES ANOTHER
Posted: Sun Apr 29, 2007 7:05 am
Can you still buy front and rear glass ruber seals for these cars?
This old car is taking some ironing out AND SOME SERIOUS METAL WORKING!
It didnt look too bad till i started taking the paint off!
I had to remake the rear wheelarch, the trailing quater, about 12" of the lower quater before the wheelarch then i found all the structure in the lower quater was dust and someone had cut a 3 foot hole in the rocker pannel and glued a horrid bit of steel in its place with sealer so that meant remaking the sill!
Then i started poking holes in th inner sill so i had to remake that so now i have the front floors to contend with and the webbing under that!
Does anyone know were i can get this webbing?
WHAT A NIGHTMARE!
I will keep you all updated on the cars progress from now on, talk to you all later.
This old car is taking some ironing out AND SOME SERIOUS METAL WORKING!
It didnt look too bad till i started taking the paint off!
I had to remake the rear wheelarch, the trailing quater, about 12" of the lower quater before the wheelarch then i found all the structure in the lower quater was dust and someone had cut a 3 foot hole in the rocker pannel and glued a horrid bit of steel in its place with sealer so that meant remaking the sill!
Then i started poking holes in th inner sill so i had to remake that so now i have the front floors to contend with and the webbing under that!
Does anyone know were i can get this webbing?
WHAT A NIGHTMARE!
I will keep you all updated on the cars progress from now on, talk to you all later.Posted: Sun Apr 29, 2007 12:42 pm
Lookin' good Matty... I sure am envious of you folks with an actual garage to work in! REALLY hard to get anything done outside in the open but just can't afford anything else right now... Great job on the metal work there Matty!
Posted: Mon Apr 30, 2007 12:23 pm
This is were i work so its ideal in some ways but not in others.
Re: My car.
Posted: Sun Dec 21, 2008 4:30 am
Its been a long time since i posted any info on this site regarding my car, but i will be continuing with the car on 5th of january so i will post some stuff then, not really looking forward to the other side as it is going to be as bad if not worse than the other side! Still never mind, i will show u guyys with little bodwork know how how to make lets say a wheelarch with no fantastic equipment anyways till then all the best for christmas guys!
anyways till then all the best for christmas guys!Re: My car.
Posted: Mon Dec 22, 2008 4:41 pm
Matty,
I bought my windshield rubber at Andy Bernbaum's place and it was $95 for the front piece.
Quality was excellent. See the list of all rubber parts for 59 Plymouths.
www.oldmoparts.com
1957-59 PLYMOUTH
A-319B...Windshield rubber........................................................................ $95.00 /ea.
A-332B...Rear window rubber,8.................................................................. 95.00 /ea.
A-333B...Rear window rubber,9.................................................................. 95.00 /ea.
A-337B...Door weatherstrip, 2-door hardtop,............................................. 35.00 /kit
A-338B...Door weatherstrip, 4-door hardtop............................................. 60.00 /kit
A-339B...Door weatherstrip, convertible..................................................... 35.00/kit
A-340B...Door weatherstrip, 2-door sedan................................................. 42.00 /kit
A-341B...Door weatherstrip, 4-door sedan................................................ 74.50 /kit
A-360......Window sweeper, 8 ft. length,5.................................................... 26.00 /ea.
A-361......Window channel, 8 ft. length,6...................................................... 28.00 /ea.
A-362......Chrome beaded window sweeper, 8 ft. length,5............................ 27.00 /ea.
A-362A...Window sweeper clips................................................................. 0.50 /ea.
A-363......Chrome beaded window channel, 8 ft. length,6............................. 29.00 /ea.
A-364......Window guide, rear of vent window,7.......................................... 12.50 /ea.
A-364R...Window guide, rear of door,7...................................................... 12.50 /ea.
A-383......Trunk weatherstrip....................................................................... 39.50 /ea.
A-401A...Roofrail weatherstrip, 2-door hardtop.......................................... 99.00 /set
A-401B...Roofrail weatherstrip, 4-door hardtop.......................................... 99.00 /set
A-401C...Roofrail weatherstrip, convertible................................................. 99.00 /set
A-416......Convertible top header rubber, 2 piece set.................................. 39.50 /set
A-436......Quarter window divider rubber,7.................................................. 32.50 /pr.
A-453......Rubber cowl to hood seal............................................................ 19.50 /ea.
5Sedan, hardtop and convertible. 6Sedan only.
7Hardtop and convertible. 8Has interior metal screw-on garnish moulding.
9Has large rubber lip on inside.
Curt
I bought my windshield rubber at Andy Bernbaum's place and it was $95 for the front piece.
Quality was excellent. See the list of all rubber parts for 59 Plymouths.
www.oldmoparts.com
1957-59 PLYMOUTH
A-319B...Windshield rubber........................................................................ $95.00 /ea.
A-332B...Rear window rubber,8.................................................................. 95.00 /ea.
A-333B...Rear window rubber,9.................................................................. 95.00 /ea.
A-337B...Door weatherstrip, 2-door hardtop,............................................. 35.00 /kit
A-338B...Door weatherstrip, 4-door hardtop............................................. 60.00 /kit
A-339B...Door weatherstrip, convertible..................................................... 35.00/kit
A-340B...Door weatherstrip, 2-door sedan................................................. 42.00 /kit
A-341B...Door weatherstrip, 4-door sedan................................................ 74.50 /kit
A-360......Window sweeper, 8 ft. length,5.................................................... 26.00 /ea.
A-361......Window channel, 8 ft. length,6...................................................... 28.00 /ea.
A-362......Chrome beaded window sweeper, 8 ft. length,5............................ 27.00 /ea.
A-362A...Window sweeper clips................................................................. 0.50 /ea.
A-363......Chrome beaded window channel, 8 ft. length,6............................. 29.00 /ea.
A-364......Window guide, rear of vent window,7.......................................... 12.50 /ea.
A-364R...Window guide, rear of door,7...................................................... 12.50 /ea.
A-383......Trunk weatherstrip....................................................................... 39.50 /ea.
A-401A...Roofrail weatherstrip, 2-door hardtop.......................................... 99.00 /set
A-401B...Roofrail weatherstrip, 4-door hardtop.......................................... 99.00 /set
A-401C...Roofrail weatherstrip, convertible................................................. 99.00 /set
A-416......Convertible top header rubber, 2 piece set.................................. 39.50 /set
A-436......Quarter window divider rubber,7.................................................. 32.50 /pr.
A-453......Rubber cowl to hood seal............................................................ 19.50 /ea.
5Sedan, hardtop and convertible. 6Sedan only.
7Hardtop and convertible. 8Has interior metal screw-on garnish moulding.
9Has large rubber lip on inside.
Curt
Re: My car.
Posted: Tue Dec 23, 2008 2:26 am
Hey thanks for the great information, didnt realise you could get all those seals still! merry christmas from me in the uk! 
Re: My car.
Posted: Tue Dec 23, 2008 6:07 am
Am looking forward to your and Ron Keij's progress reports and pictures. Any skills you can pass on would be appreciated. I'm kind of a self taught amature at this panel business as well as most of the rest of the resto process.
thanks and Merry Christmas and Happy Holidays to Everyone Steve P.S. Good Luck With The Car!!
thanks and Merry Christmas and Happy Holidays to Everyone Steve P.S. Good Luck With The Car!!
Re: My car.
Posted: Sat Jan 10, 2009 1:48 pm
Heres some picks taken today, showing how i formed the lower quater pannel i will post more good stuff as i go along.
Re: My car.
Posted: Sat Jan 10, 2009 2:17 pm
cant upload em why?
Re: My car.
Posted: Sat Jan 10, 2009 2:24 pm
Plymouth
Re: My car.
Posted: Sat Jan 10, 2009 2:26 pm
....
Re: My car.
Posted: Sat Jan 10, 2009 2:41 pm
.......
Re: My car.
Posted: Sat Jan 10, 2009 3:07 pm
Youre doin a good job! Stay with it!